ST Pepper Semi Solid
Lightweight and tight sound all-rounder
"ST Pepper" uses all mahogany for both neck and body.
The unique hollow body construction makes it super lightweight. (3 kg or less)
"ST Pepper Semi Solid" has a unique hollow body structure with a "center block".
This makes the sound tighter than "ST Pepper Hollow" which has no center block.
It is an all-rounder that supports a wide range of sounds from clean tones to over drive sounds.
● Without the center block, the "ST Pepper Hollow" has a lighter, warmer, richer sound.
● Uses Original "Eternal Fret 016WARM" that provide a maintenance-free, natural and comfortable sound.
● In addition, it comes equipped with a Hybrid Humbucker – an original pickup developed by Freedom Custom Guitar Research.
Even though this pickup looks like a regular Humbucker, it can also produce a very realistic single coil sound. Using the pre-installed Tap Control, the output can be seamlessly adjusted from a humbucker sound to a single coil sound.
Custom Made
● HH, SSH, HSH, SSS and various pickup layouts can be selected.
● Colors can be selected from a variety of color charts.
● Pickguards of various materials can be selected.
● Order and estimate.
・May 2024
"Stainless Fret", which has been patronized by many users for many years as F.C.G.R.'s original fret, has changed its product name and packaging to "Eternal Fret".
We look forward to your continued patronage.
・February 2020
The logo design of all original guitar and bass products has been changed.
Specifications
ST Pepper Semi Solid
Neck / Shape |
Mahogany / Pepper U-Shape
|
Scale |
25.5in
|
Joint |
Bolt on 4-Point Joint / Tone Shift Plate 2mm
|
Nut / Nut Width |
Silicone Oiled Bone / 42mm
|
Fret |
Eternal Fret / EI-W-016WARM / 22F
|
Fingerboard (FB) |
Rosewood
|
Fingerboard Radius |
280R
|
Machinehead |
GOTOH SD91-P5W(pearl)-HAP-L
|
Top Position Mark |
Dot - White Shell
|
Side Position Mark |
Luminlay - 3mm (Green)
|
Body Wood (Top & Back) |
Mahogany 2pc
|
Pickups / SSH |
(2)WTA-ST01 , (1)Hybrid HB TypeⅠ
|
Control |
1Vol. / 1Tone / 1Tap Ctr. / 5way Switch
|
Bridge |
Original Synchronized Tremolo / S108 (10.8mm)
|
Neck Finish |
Poly ・ Full Flat - Thin Skin Finish
|
Body Finish |
Poly ・ Gloss
|
Strings |
D'Addario 10-46
|
* Product specifications and prices are subject to change without notice.
Quality
Commitment to carefully selected wood and durability
To build a guitar that sounds great even after 100 years, at F.C.G.R. we select our woods very carefully. The selected wood is stabilized in our special humidity-controlled warehouse for up to one year to eliminate the possibility of warpage later.
Original frets
Our stainless-steel fret wire has been specially developed by F.C.G.R. to be completely rust-proof and reduce the necessity for maintenance for the lifetime of the instrument. Additionally, our stainless steel produces a warmer sound, eliminating the excessive brightness often associated with typical stainless steel frets.
Stability and solid performance
Often guitars and basses are strung up for the first time after the fretwork and set-up have been completed. At F.C.G.R. after the necks are painted, we assemble the full instrument and tension up their strings for a few weeks - this allows the neck to settle into its final stable shape. Using a specially designed rig, we then adjust the frets with the neck in its final playing position, with the same curvature as when strings are present. Through this process we can achieve the highest standard for our fretwork, which cannot be achieved in mass-produced instruments.
Glow in the dark side-position markers
We use Luminlay SG-30 (3mm) side-position markers which gather light and glow in the dark. It is a small touch, but invaluable on a dark stage - where it will allow you to play with greater confidence and less worry about losing your way around the fingerboard.
Color
There is a story behind each of our original colours - and we continue to develop new ones all the time!
Since the thickness, and type, of paint and lacquer used influences the resonance of the instrument, we can use our years of experience to produce a finish that brings out the character of your individual instrument.
We welcome you to inspect our colour chart, and visit our showroom if possible to see our finishes in person. And if there are colours that you would like on your instrument and cannot see on our page - please let us know, we'll do our best meet your request.
Resilience to humidity and weather variation
All Pepper series guitars have semi hollow bodies, but all of their inner surfaces that are exposed to air are hand coated with lacquer. Similarly, all other holes and countersunk surfaces are also coated with a weather-resistant lacquer. The whole instrument is thus maximally protected to weather variation, and can withstand even a very high humidity environment - like, for example, Japan in the summer.