RR series

RRS BRAVERY

Brightest and roughest member of the RR family. So sharp it may bite!

This is the roughest and wildest sounding of our RR models. To achieve this, we use a maple neck, and a bushed bolt-on neck joint.
For a bright sound with fast attack, we've paired the maple neck with an ash or alder body. A sound that gives you confidence to rock out all night!

 

Specifications

RRS BRAVERY Base price: ¥336,000 (before tax)

Order
Neck / Shape

Maple / U-Shape

Scale

25inc.

Joint

Bolt on 4-Point Joint / Bush

Nut / Nut Width

Silicone Oiled Bone / 42mm

Fingerboard

Rosewood

Fret

F.C.G.R. SP-SF-05 WARM / 22F

Fingerboard Radius

305

Top Position Mark

Oval (Pearloid)

Side Position Mark

Luminlay 3mm ・ Green

Machinehead

GOTOH SD510-06M-HAP

Pickups (F.C.G.R. Original)

F-90 & Hybrid HB Type 1

Control

2Vol. / 1Tone / 1Tap Ctr. / 3way Switch

Bridge

F.C.G.R. Lockable Bridge

Neck Finish / Color

Poly ・ Full Flat / Natural

Body Finish

Poly ・ Gloss

Downloads

Quality

Commitment to carefully selected wood and durability

To build a guitar that sounds great even after 100 years, at F.C.G.R. we select our woods very carefully. The selected wood is stabilized in our special humidity-controlled warehouse for up to one year to eliminate the possibility of warpage later.

Original stainless steel frets

Our stainless-steel fret wire has been specially developed by F.C.G.R. to be completely rust-proof and reduce the necessity for maintenance for the lifetime of the instrument. Additionally, our stainless steel produces a warmer sound, eliminating the excessive brightness often associated with typical stainless steel frets.

Stability and solid performance

Often guitars and basses are strung up for the first time after the fretwork and set-up have been completed. At F.C.G.R. after the necks are painted, we assemble the full instrument and tension up their strings for a few weeks - this allows the neck to settle into its final stable shape. Using a specially designed rig, we then adjust the frets with the neck in its final playing position, with the same curvature as when strings are present. Through this process we can achieve the highest standard for our fretwork, which cannot be achieved in mass-produced instruments.

Set angle neck and headstock

In order to achieve a luscious and rich sounds, we set the neck into the body at a very shallow 1 to 2 degree angle. The thickness of the headstock gently tapers off towards the tip to enhance the tone of the guitar. With all models in the RR series, you can select between an F.C.G.R. original 3+3 headstock (with a head angle of 14°), or an F.C.G.R. Original 6-In-Line headstock (with a head angle of 11°).

A sound that fits into any situation

Our Hybrid Humbucker is equipped with a standard tap control, allowing for simple "humbucker → single" switching. In addition, it can be steplessly adjusted between these two extremes. From the same pickup you can obtain a wild, juicy humbucker sound, or sharp single coil, or indeed an intermediate tone of P-90 type. Because all these tones can be achieved with a single guitar, you can dial in your ideal tone to match any amplifier combination. For some models, F.C.G.R. Original "F-90 Soapbar" can also be selected. It is an extremely responsive original single coil that faithfully captures picking nuances faithfully, producing a thick and powerful tone.

Glow in the dark side-position markers

We use Luminlay SG-30 (3mm) side-position markers which gather light and glow in the dark. It is a small touch, but invaluable on a dark stage - where it will allow you to play with greater confidence and less worry about losing your way around the fingerboard.

This site uses cookies

By using our website you agree to our use of cookies in accordance with our cookie policy. For more information please click here

Close