RR series

RRS

Traditional solid body recipe for a great rock sound

A traditional all-mahogany, solid-body construction - a simple recipe for a great rock and roll tone.
In its basic specification, with F-90 pickups, this model will give you a wide-spectrum sound that just asks to be plugged into a high-gain stack for endless hours of musical enjoyment.

 

・May 2024
"Stainless Fret", which has been patronized by many users for many years as F.C.G.R.'s original fret, has changed its product name and packaging to "Eternal Fret".
We look forward to your continued patronage.

 

・February 2020
The logo design of all original guitar and bass products has been changed.

 

HOW TO ORDER

● Online orders can be placed through the following dedicated page

* Product specifications and prices are subject to change without notice.

Specifications

RRS Base Price (before tax): ¥627,000

Order
Neck / Shape

Mahogany / 60's U-Shape

Scale

25in

Joint

Set Neck

Nut / Nut Width

Delrin / 42mm

Fingerboard (FB)

Rosewood

Fret

Eternal Fret 019WARM / 22F

Fingerboard Radius

305R

Machinehead

GOTOH SD510-06M-HAP

Top Position Mark

Oval - White Pearloid

Side Position Mark

Luminlay - 3mm (Green)

Body Wood

Mahogany 2pc

Pickups

(2) F.C.G.R. F-90

Control

2Vol. / 2Tone / 3way Switch

Bridge

F.C.G.R. Lockable Bridge (10.4mm Pitch)

Neck & Body Finish

N.C. Lacquer ・ Gloss

Strings

D'Addario 10-46

Case

Original Hard Case

Downloads

Quality

Commitment to carefully selected wood and durability

To build a guitar that sounds great even after 100 years, at F.C.G.R. we select our woods very carefully. The selected wood is stabilized in our special humidity-controlled warehouse for up to one year to eliminate the possibility of warpage later.

Original frets

Our stainless-steel fret wire has been specially developed by F.C.G.R. to be completely rust-proof and reduce the necessity for maintenance for the lifetime of the instrument. Additionally, our stainless steel produces a warmer sound, eliminating the excessive brightness often associated with typical stainless steel frets.

Stability and solid performance

Often guitars and basses are strung up for the first time after the fretwork and set-up have been completed. At F.C.G.R. after the necks are painted, we assemble the full instrument and tension up their strings for a few weeks - this allows the neck to settle into its final stable shape. Using a specially designed rig, we then adjust the frets with the neck in its final playing position, with the same curvature as when strings are present. Through this process we can achieve the highest standard for our fretwork, which cannot be achieved in mass-produced instruments.

Glow in the dark side-position markers

We use Luminlay SG-30 (3mm) side-position markers which gather light and glow in the dark. It is a small touch, but invaluable on a dark stage - where it will allow you to play with greater confidence and less worry about losing your way around the fingerboard.

Color

There is a story behind each of our original colours - and we continue to develop new ones all the time! Since the thickness, and type, of paint and lacquer used influences the resonance of the instrument, we can use our years of experience to produce a finish that brings out the character of your individual instrument. We welcome you to inspect our colour chart, and visit our showroom if possible to see our finishes in person. And if there are colours that you would like on your instrument and cannot see on our page - please let us know, we'll do our best meet your request.

A sound that fits into any situation

Our Hybrid Humbucker is equipped with a standard tap control, allowing for simple "humbucker → single" switching. In addition, it can be steplessly adjusted between these two extremes. From the same pickup you can obtain a wild, juicy humbucker sound, or sharp single coil, or indeed an intermediate tone of P-90 type. Because all these tones can be achieved with a single guitar, you can dial in your ideal tone to match any amplifier combination. For some models, F.C.G.R. Original "F-90 Soapbar" can also be selected. It is an extremely responsive original single coil that faithfully captures picking nuances faithfully, producing a thick and powerful tone.

Set angle neck and headstock

In order to achieve a luscious and rich sounds, we set the neck into the body at a very shallow 1 to 2 degree angle. The thickness of the headstock gently tapers off towards the tip to enhance the tone of the guitar.

Original Headstock

With all models in the RR series, you can select between an F.C.G.R. original 3+3 headstock (with a head angle of 14°), or an F.C.G.R. Original 6-In-Line headstock (with a head angle of 11°).

This site uses cookies

By using our website you agree to our use of cookies in accordance with our cookie policy. For more information please click here

Close