Shielding paint to block out external noise

 Applying this paint blocks out external noise from electrical equipment such as televisions, lighting, live stage equipment, and any other electromagnetic disturbance.

How to use:

1. Remove all parts in the cavity.
2. Be sure to clear out any dust etc. from the cavity.
3. Shake and stir the can well.
4. Make sure that the viscosity of the paint is uniform before applying, so that an even coat can be applied.
5. After applying the paint, let it dry - ideally in a natural environment. If you wish to use a dryer to speed up the process, make sure to position it far away - overheating the paint may cause cracks in the finish and reduce shielding.
6. Attach a grounding lug to the painted surface, to complete the shielding.

• Please be aware that changing the shielding of your instrument may also influence the tone.
• SP-D-01 Polyurethane paint will attach to and react with other polyurethane paint on your instrument, so be careful to check the type of paint you are using.
• When overlaying SP-D-02 or SP-D-03 with polyurethane or polyester paint, they will not mix, and the paint may peel off after drying.
• If you are using polyurethane paint in painted instrument cavity, and wish to apply Noise Hell 3 (High Shield), first apply a coat of Noise Hell 1, let it dry, and then apply Noise Hell 3. 
• Please test out the product on a small part of the instrument first.
• Do not use for purposes other than those intended.
• Use in a well-ventilated area, and far away from fire.
• Do not swallow.
• F.C.G.R. bears no responsibility for the instrument during, or after application.
• In case you encounter problems with the application of this product, we are happy to assist with repairs (subject to an appropriate fee).

First Aid measures

• In case of skin contact, rinse immediately with clean running water and consult a doctor if you encounter discomfort.
• In case of contact with eyes, rinse immediately with a large amount of running water (for at least 15 minutes).
• If swallowed, please immediately contact a doctor for medical assistance.

Storage

• Keep out of the reach of children.
• Avoid direct sunlight. Keep the closed container in a cool dark place, with good ventilation. 
• Keep away from fire.
• Product specifications and appearance may change without notice.